How can the expired marking stickers on the front windshield be completely removed?

How can the expired marking stickers on the front windshield be completely removed? How can the expired marking stickers on the front windshield be completely removed?

1. Chemical cleaning method

“In fact, before removing the logo patch on the front windshield glass, you can cover it with a hot towel and soak the car logo. When it becomes wet, some logo patches can be easily tear off. ”Mr. Wang, the owner of the car, said that if the sign sticker with a long time and strong adhesion is not covered with a sun film in the front windshield glass, it can be removed with a special cleaning solution, such as asphalt cleaner. Without these scavengers, you can soak them with soapy water or detergent water, which can also achieve a complete removal effect. ”

If the front windshield glass is covered with a sun film, you can use a towel to dip it in a small amount of alcohol and wipe it repeatedly on the car logo, but you must not spray it directly on the glass, otherwise it will damage the car mask. “Whether there is or not the front windshield glass is covered with sun film, you cannot use sharp objects such as blades to remove the label, otherwise the glass or sun film will be scratched. Various bank cards, membership cards, and phone cards are good tools. ”Mr. Wang emphasized.

2. Physical cleaning method

Physical cleaning method is actually very simple. Almost every family has tools, it is a hair dryer used for hair salons. The owner of the car Ms. Huang said that if conditions permit, use a long-wire plug-in board to guide the power outdoors, plug in a hair dryer, and heat it back and forth with hot air around the marking sticker. In a short while, various marking stickers can be easily uncovered.

3. Once and Forever Method

There are tools for sticking labels, such as electrostatic stickers or suction cup stickers. The electrostatic sticker is not expensive, similar to the protective sticker that protects the screen of a mobile phone, but the size is slightly larger than the logo sticker. Car owners can first stick the logo sticker on the static sticker, and then stick the static sticker on the front windshield glass. This way it is very firmly attached and will not stick to the front windshield glass when removed.

electrostatic stickers are used for one-time use, while suction cup stickers can be used repeatedly. The suction cup sticker is similar to an ultra-thin photo frame, where the logo sticker is placed, and then secure it to the front windshield glass using the suction cup attached to the suction cup. Both tools are easy to install and take. Although the electrostatic stickers cannot be recycled, they are more beautiful in use than recyclable suction cup stickers.