A clever way to clean tile floors

Clever way to clean tile floors

Clever way to clean tile floors

Use multi-function detergent paste

Ceramic tiles are often stained by greasy, water rust, soap scum, etc., especially the joints of the tile are more likely to hide dirt. In order to keep the porcelain surface clean and not damage the porcelain surface bright, you can use multi-function detergent paste for cleaning. In the gaps of the ceramic tile, you should first use a toothbrush to dip a little detergent to remove dirt, and then use a brush to brush a waterproofing agent in the gap, which can not only prevent water seepage but also prevent mold growth.

Old tiles should be renovated when adding tiles to the surface of old tiles. Generally, all tiles are required to be cleaned up, which is very labor-intensive. If you want to add new tiles to old tiles, cement mortar is difficult to handle. At this time, resin-type stone adhesive must be used. It is not afraid of greasy or stains on the tiles, and has a good bonding strength.

Daily maintenance of light-colored ceramic tiles also requires some small skills. When cleaning, you can choose clean water, dishwashing detergent or soap; when cleaning with soap, add a little mixture of ammonia and turpentine oil to make the tiles smoother. If tea or other daily necessities are attached to the tiles, they should be cleaned in time, and if necessary, they should be cleaned with corresponding cleaning supplies. If scratches appear on the brick surface, you can apply toothpaste to the scratches, which can be repaired by wiping the cloth. Dirt removal paste can be used to remove dirt from time to time at the gap between bricks, and then a layer of waterproofing agent can prevent mold growth. The surface anti-fouling of vitrified bricks is the key. The only defect of vitrified bricks is that after polishing, the pores of the vesicle are exposed, and oil, dust, etc. are prone to seep into it. According to industry insiders, this is a recognized problem in the industry, but some manufacturers have solved this problem through research through new technologies. Many brands of products can be sold as qualified products without anti-fouling treatment. Consumers do not understand the situation and do not care about the situation when laying and using it, and stains will occur. Consumers should ask clearly when purchasing that vitrified tiles that have not been treated with anti-fouling should be waxed during use, and ordinary floor wax is enough. Before paving, in order to avoid damage to the brick surface during construction, cover the brick surface with woven bags and other items that are not easy to decolorize.

When cleaning and maintaining vitrified tiles on daily basis, you must first thoroughly clean all stains on the floor tiles. If there is glue or sticky, you can use a neutral detergent and a cleaning cloth to wipe it off. Sprinkle the floor cleaning agent (please follow the instructions) on the floor tiles and use a waxing machine to clean the stains on the floor tiles. Then pour the water-based wax onto a clean dry mop and apply the wax evenly on the floor tiles. After waxing, let the surface of the floor tiles dry by itself. You can only step on it after drying. You can also use an electric fan to assist in blow-drying. Generally, it will only dry completely 8 hours after waxing. If there are heavy objects, you must wait until the wax is completely dry before you can move it. This will keep the tiles bright.

Wax the surface of the floor tiles turns yellow and re-waxing, it is necessary to use a wax remover. The specific method is: use the wax remover directly without adding water, sprinkle evenly on the place where the wax is to be removed for about 10-15 minutes. After the wax remover penetrates into the floor tiles, pour the floor tiles with water. The wax needs to be completely removed, otherwise the wax will not shine after being re-washed. After removing the wax, please follow the above steps to clean and maintain it.